Author
|
Message
|
---|
Anon Deleted Posts : Location : Status : Offline
|
Thursday 14th.
Hi to all,
Well set off for MOT test station just after midday and all seemed to be running well, then after about three miles a a bad vibe from the propshaft.
But carried on and went through the test, "passed" so a steady run home to check out that prop, seems to be the centre mounting bracket on to the its crossmember.
So making up a new mounting bracket, but at least the old Bedshed has passed its test for another year.
Doug.
----------------------
|
Fri 15 Apr 2011 @ 20:29
| |
Anon Deleted Posts : Location : Status : Offline
|
great to here she passed doug,mine passed on wensday:o with a warning my centre exhaust has lots of pin holes,ah well better start saving;]
----------------------
|
Fri 15 Apr 2011 @ 21:40
| |
Anon Deleted Posts : Location : Status : Offline
|
Exhausted.
Hi geebee,
Pin holes or not you got it passed, I was lucky to pick up the two front sections of an exhaust which were new just a few weeks ago.
So that looked good on the MOT test, but they are still saying the flashers are too slow.
But the journey to and from showed up that propshaft centre mount, so I will make up a new one today and hope that cures the problem.
They also said the rear brake reading was almost as good as the front, but that is due to the weight of tools in the rear cuboards.
Time to unload some of that gear and put it all back into the workshop, if I can find the space.
Doug.
----------------------
|
Sat 16 Apr 2011 @ 11:36
| |
Anon Deleted Posts : Location : Status : Offline
|
my beddies going in for retest this Thursday hopefully it'll pass cant wait...
|
Tue 10 May 2011 @ 19:46
| |
Anon Deleted Posts : Location : Status : Offline
|
passed
|
Fri 13 May 2011 @ 10:17
| |
Anon Deleted Posts : Location : Status : Offline
|
MOT.
Hi guppjfreak,
That is great news well done, no stopping you now, it is a great feeling.
Doug.
----------------------
|
Fri 13 May 2011 @ 18:15
| |
Time in GMT
|