|
|
[Home] [Search] [FAQ] |
|---|---|
| [Private Message] [Register] [Profile] [Member list] [Log-in] |
| Who's Online: |
| There are 0 member(s), and 1 guest(s) online. |
| [Printable Version] [Post Reply] |
| Author | Message |
|---|---|
|
Anon Deleted Posts : Location : Status : Offline |
starter motor i have no click nothing getting rac out tomo can any one tell me where to start looking im sure its only something come lose HHHHHEEEEEELLLLLPPPPPPP peace ..guy
---------------------- |
 Sun 07 Jul 2013 @ 22:48
|    |
|
Gethin Card Holder Posts : 462 Location : east lancs Status : Offline 
|
on the starter motor you will find 1 thick black cable which is the feed and a thin cable with spade connector on it. with Beddy in neutral try joining the spade terminal on the starter to the feed with a piece of short cable , if starter turns then you have a dirty joint or broken wire .. a good tip is to use a jump lead from the engine metal to the negative terminal on the battery , eliminates bad earth. |
Mon 08 Jul 2013 @ 09:17
|
|
|
Anon Deleted Posts : Location : Status : Offline |
Hi guy I had this problem mines diesel so hope yours is the same. Mine had a really bad earth strap between chassis and battery negative. I got a really thick piece of cable from an electrical shop the higher amp rating the better. Undo one of the top starter bolts and replace with a longer bolt do it back up as normal then on the extra bit fit cable and another nut. Then run this straight to battery. Also when I fitted new starter it wouldn't turn from key (I think the ignition couldn't cope with the current) so like gethin has said use jump lead or screwdriver to short across if it turns as mine did put a starter button on. Hope this helps john ---------------------- |
Mon 08 Jul 2013 @ 13:17
| |
|
Anon Deleted Posts : Location : Status : Offline |
right i shall give both a go tomo thank you very much for your help ......mines not a diesel but im sure there the same .... one other thing as a just incase ive got another starter but not sure if it works if needs be can i just wire that baby up with out bolting it on to see if it works
guy ---------------------- |
Mon 08 Jul 2013 @ 21:44
| |
|
Gethin Card Holder Posts : 462 Location : east lancs Status : Offline
|
yes you can . best way is with jump leads red to the input of the solenoid and black to the casing then holding the starter under your foot link the igniter terminal to the red jump lead.......... |
Mon 08 Jul 2013 @ 22:50
|
|
|
Anon Deleted Posts : Location : Status : Offline |
wow thats great gethin old son thanks alot ill check out everything else but its great to know i can do that .....i know ive said it but loving my new stick old son i know it was for the wife but hey its great so one more time
guy ---------------------- |
Mon 08 Jul 2013 @ 23:34
| |
|
Anon Deleted Posts : Location : Status : Offline |
WOW thank you both didwot you said and after checking EVERY THING i was trying to move abit of the solenoid when BANG sparks every where ....so it was working cleaned evey thing put it all back and whooooaaa started first time im a happy man and am going off for a couple of days weeek end 
guy
---------------------- |
Tue 09 Jul 2013 @ 22:13
| |
|
Anon Deleted Posts : Location : Status : Offline |
Great news mate mine was the same so knew it was nothing serious cheers john ---------------------- |
Tue 09 Jul 2013 @ 22:43
| |
| Time in GMT | |
| [Post Reply] | |
 New posts since your last visit |
Administrative Functions: Open/Close/Delete Thread / Move Thread |
 Old post |
Back to the CF-UK Homepage ][ Email CF-UK
Powered by FunkBoard vCF0.74c