[Home] [Search] [FAQ] | |
---|---|
[Private Message] [Register] [Profile] [Member list] [Log-in] |
Who's Online: |
There are 0 member(s), and 1 guest(s) online. |
[Printable Version] [Post Reply] |
Author | Message |
---|---|
Anon Deleted Posts : Location : Status : Offline |
Hazard lights HiI want to add hazard lights to my CF. Any advice on what I need to buy and how to do it much appreciated. ---------------------- | Tue 18 Mar 2014 @ 18:26 |
Gethin Card Holder Posts : 462 Location : east lancs Status : Offline |
most CF had hazard fitted as standard. If yours is the mk1 then you should find a pull out knob on the side of the binnacle the mk2 had a rocker switch on the dash............. you can purchase retro fitting system off ebay which will need to be connected to both s ides if the existing indicator system | Tue 18 Mar 2014 @ 20:31 |
Anon Deleted Posts : Location : Status : Offline |
Thanks. Yes mark 1. It didn't have a switch but I have bought a pull out switch. Not sure what I need next. | Tue 18 Mar 2014 @ 20:56 |
Gethin Card Holder Posts : 462 Location : east lancs Status : Offline |
unless its an universal kit then it wont work............. | Tue 18 Mar 2014 @ 22:14 |
Anon Deleted Posts : Location : Status : Offline |
hazard lights Hi,you will need as Gethin said a universal hazard set up.If you were to try the Bedford set up,it's very complicated as it has about12 wires.You would also have to change your flasher unit.Cheers+Beers,Jim.---------------------- | Fri 21 Mar 2014 @ 20:15 |
Time in GMT |
[Post Reply] | |
New posts since your last visit | Administrative Functions: Open/Close/Delete Thread / Move Thread |
Old post |
Back to the CF-UK Homepage ][ Email CF-UK
Powered by FunkBoard vCF0.74c