![]() |
[Home] [Search] [FAQ] |
---|---|
[Private Message] [Register] [Profile] [Member list] [Log-in] |
Who's Online: |
There are 0 member(s), and 1 guest(s) online. |
[Printable Version] [Post Reply] |
Author | Message | |
---|---|---|
Anon Deleted Posts : Location : Status : Offline |
but let the tappets fall out, now I went to reset the clearance and found a few problems being that the adjustment screws(not all)had been rounded off where the allen key goes so I cant do it. so my question is where can I get some adjuster screws? regards Paul |
![]() | ![]() ![]() ![]() |
Anon Deleted Posts : Location : Status : Offline |
tappet screws Hi,You could try A Bailey in Leeds.He is not cheepCheers,Jim,---------------------- |
![]() | ![]() ![]() ![]() |
Anon Deleted Posts : Location : Status : Offline |
Thanks for the reply, I think I might have found some ![]() you don't happen to know anyone who could sort me out with some brake pipes for cf250 swb 2.3 1982 with drums all round? ![]() Paul |
![]() | ![]() ![]() ![]() |
Gethin Card Holder Posts : 462 Location : east lancs Status : Offline ![]() |
Brake pipes can be made up by your self if your able to this is the cheapest way of making then.. other wise its means using a piece of string and follow the pipe from union to union. this can then be measured out and 20mm or 1/2" added depending which measurement system your using, jotting all this down then either go down your local factors and ask if they can make you up them pipes... REMEMBER though that you need imperial fittings not metric unions fitted... if you still cant find any then get back to me and I will price up the cost of a set for you so long as you can measure the pipes exactly.... they will need to be gently bent to the correct shape when their fitted though |
![]() |
![]() ![]() ![]() ![]() ![]() |
Anon Deleted Posts : Location : Status : Offline |
Thanks thats a great help ![]() Paul |
![]() | ![]() ![]() ![]() |
bluebedouin Global Moderator Posts : 2444 Location : Northampton,England. Status : Offline ![]() |
This thread should help in putting things back together.11567 ---------------------- |
![]() |
![]() ![]() ![]() ![]() ![]() |
Anon Deleted Posts : Location : Status : Offline |
Hi, Thanks bluebedouin that makes things a lot easier thanks ill update once I get her purring. Thanks again Paul |
![]() | ![]() ![]() ![]() |
Anon Deleted Posts : Location : Status : Offline |
Where did you get your small tappet screw from? Thanks in advance |
![]() | ![]() ![]() ![]() |
bluebedouin Global Moderator Posts : 2444 Location : Northampton,England. Status : Offline ![]() |
I can't find anything online in a quick search but if you try your local motor factors they might be able to source for you. ![]()
---------------------- |
![]() |
![]() ![]() ![]() ![]() ![]() |
Time in GMT |
[Post Reply] | |
![]() |
Administrative Functions: Open/Close/Delete Thread / Move Thread |
![]() |
Back to the CF-UK Homepage ][ Email CF-UK
Powered by FunkBoard vCF0.74c