![]() |
[Home] [Search] [FAQ] |
---|---|
[Private Message] [Register] [Profile] [Member list] [Log-in] |
Who's Online: |
There are 0 member(s), and 1 guest(s) online. |
[Printable Version] [Post Reply] |
Author | Message |
---|---|
Anon Deleted Posts : Location : Status : Offline |
blade sharpning Does anyone know where I can get a set of 2 planer blades sharpned?---------------------- |
![]() | ![]() ![]() ![]() |
Anon Deleted Posts : Location : Status : Offline |
Hi Jim, Buy yourself an oil stone. doujoy ---------------------- |
![]() | ![]() ![]() ![]() |
Colin Birch Admin Posts : 4277 Location : Pontypridd, South Wales Status : Offline ![]() |
I'm with Doug on this. Buy a good quality oil stone and you'll get a good edge and the stone will last forever. ---------------------- |
![]() |
![]() ![]() ![]() ![]() ![]() ![]() |
Anon Deleted Posts : Location : Status : Offline |
I always used a diamond plate from Axminster Power tools to sharpen my blades, and made a wooden fixture to hold the blade at the right angle. |
![]() | ![]() ![]() ![]() |
bluebedouin Global Moderator Posts : 2444 Location : Northampton,England. Status : Offline ![]() |
Or you could drive 7 miles into Bangor & buy a set of two from Toolstation! ![]() |
![]() |
![]() ![]() ![]() ![]() ![]() |
Anon Deleted Posts : Location : Status : Offline |
blade sharpning Thanks for the advice the main prob is getting the angle right.I think I will try to make a fixture as Mike says.Good thought Graham but tool station don't hold my blades as the planer is old,like me.(LOL)Cheers all and thanks for the coments.Jim---------------------- |
![]() | ![]() ![]() ![]() |
Anon Deleted Posts : Location : Status : Offline |
sharpening Today I made a jig with the right angle for the blade and it worked I was making it to hard for myself.So thanks lads your help was great.Cheers Jim.---------------------- |
![]() | ![]() ![]() ![]() |
Time in GMT |
[Post Reply] | |
![]() |
Administrative Functions: Open/Close/Delete Thread / Move Thread |
![]() |
Back to the CF-UK Homepage ][ Email CF-UK
Powered by FunkBoard vCF0.74c