Bedford CF-UK Message Board Logo [Home] [Search] [FAQ]
Bedford CF-UK Message Board > CF Blog Spot > Wishbone bushes.
[Private Message] [Register] [Profile] [Member list] [Log-in]
Who's Online:
There are 0 member(s), and 1 guest(s) online.
[Printable Version] [Post Reply]
Author Message
Gearbox Technician
Posts : 232
Location : Perth, Scotland
Status    : Offline

Wishbone bushes.

Hi to all,

Having now done both sides of the upper wishbone bushes I had a long hard look at the tool required to let you do the lower wishbone bushes, and decided to make one out 13mm steel rod so that I can compress the front springs.
And using lock nuts on each end as was the Bedford tool this will let me get the lower wishbones off and into the press, having bought both sets of bushes anyway it is just as well to get them fitted.

Thu 09 Sep 2021 @ 13:17 View Dougie   Email Dougie   Edit this messageQuote this messagePMQuote this message
Time in GMT
[Post Reply]
New posts since your last visit Administrative Functions: Open/Close/Delete Thread / Move Thread
Old post

Forum Jump:

Back to the CF-UK Homepage ][ Email CF-UK

Powered by FunkBoard vCF0.74c